موضوع: جدیدترین نگارش های دانگل cm2 اینفینیتی در این پست

صفحه 3 از 3 اولیناولین 123
نمایش نتایج: از شماره 31 تا 42 از مجموع 42
  1. #31  
    کاربر رسمی
    شماره عضویت
    111739
    تاریخ عضویت
    Mar 2015
    ارسال ها
    37
    تشکر
    47
    تشکر شده 13 بار در 3 پست
    نقل قول نوشته اصلی توسط parlaq67 نمایش پست ها
    نخیر، بروی cm2 بدون هزینه اکتیو هستش.
    سلام من دو روزه cm2 گرفتم اما سام فعال نیست روش

    راه و روش خاصی داره آیا ؟؟
    پاسخ با نقل قول  
     

  2. #32  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    عکس از ارور لطف کنید.
    پاسخ با نقل قول  
     

  3. تشکرها از این نوشته :


  4. #33  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    Infinity `SM` software v1.11 released

    Service - added Read CRT function for MTK based phones (need Root)
    Service - added Bacup SEC function for MTK based phones (need Root)

    Installer has two parts:
    - InfinityBox_install_SM_v1.11
    - InfinityBox_update_SM_ResourcePack_v1.09 (old one). If you have Resource Pack installed earlier you do not need to download and install it again


    Download link


    Upload file to Support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News
    پاسخ با نقل قول  
     

  5. تشکرها از این نوشته :


  6. #34  
    کاربر رسمی
    شماره عضویت
    109932
    تاریخ عضویت
    Dec 2014
    ارسال ها
    253
    تشکر
    379
    تشکر شده 70 بار در 41 پست
    درود من نمیتونم sm رو باز کنم ولی بقیه رو باز میکنه. مثل ال جی. و mtk Capture.JPG
    پاسخ با نقل قول  
     

  7. #35  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    با این آموزش پیش برید

    کد:
    http://www.mediafire.com/file/c7mxbry8u2nby3b/How+To+InfinityBox+cm2+install+SM+samsung+tool+active+free+without+money.mp4
    پاسخ با نقل قول  
     

  8. کاربران : 3 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  9. #36  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    Finally MTK Module is Ready !!! Download InfinityBox_install_CM2MT2_v2.00


    Finally MTK Module is Ready !!! Download InfinityBox_install_CM2MT2_v2.00


    Quote:
    This release DO NOT require Smart-Card update! Smart-Card version required is 01.36

    MTK 6570 CPU support:
    with NAND memory
    with eMMC memory
    Read Info - Complete device info, Security info
    Read Firmware - Factory Scatter format [ NAND supported - WorldFirst and unique! ]
    Write Firmware - Factory Scatter Format [ NAND supported - WorldFirst and unique! ]
    Read NVRAM
    Write NVRAM
    Repair Security
    Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
    MemoryTool

    MTK 6750 CPU support:
    Read Info - Complete device info, Security info
    Read Firmware
    Write Firmware
    Read NVRAM
    Write NVRAM
    Repair Security
    Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
    MemoryTool

    MTK 6755 CPU support:
    Read Info - Complete device info, Security info
    Read Firmware
    Write Firmware
    Read NVRAM
    Write NVRAM
    Repair Security
    Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
    MemoryTool

    MTK 6757 CPU support:
    Read Info - Complete device info, Security info
    Read Firmware
    Write Firmware
    Read NVRAM
    Write NVRAM
    Repair Security
    Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
    MemoryTool

    MTK 6763 CPU support:
    Read Info - Complete device info, Security info
    Read Firmware
    Write Firmware
    Read NVRAM
    Write NVRAM
    Repair Security
    Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
    MemoryTool

    MTK 6797 CPU support:
    Read Info - Complete device info, Security info
    Read Firmware
    Write Firmware
    Read NVRAM
    Write NVRAM
    Repair Security
    Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
    MemoryTool

    Under Test --------------------------------------------------------

    MTK 6758 CPU support:
    Read Info - Complete device info, Security info
    Read Firmware
    Write Firmware
    Read NVRAM
    Write NVRAM
    Repair Security
    Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
    MemoryTool

    MTK 6739 CPU support:
    with NAND memory
    with eMMC memory
    Read Info - Complete device info, Security info
    Read Firmware
    Write Firmware
    Read NVRAM
    Write NVRAM
    Repair Security
    Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
    MemoryTool

    Main
    - New look and design. All simplified and optimized much, as possible. [ please refer to v2 interface introduction ]
    - New core. All code made from scratch.
    - New boot chain selection mode - automatic ( via defined user combination ) or manual.
    - New connection
    - Complete error handling and explanation
    - Internal EMIDB cover 99% of existing memory devices on both - NAND and eMMC devices
    - Easy end user customization for adding support for new device and e.t.c.

    Flasher
    - Completely new flasher design, which allow customize whole flashing process [ please refer to v2 interface introduction ]

    FW Reader
    - Completely new core, which allow handle all existing types and flash devices.

    Service
    - Security repair NOT require reboot to meta, not required CDC drivers or whatever else. All direct.
    - Format FS include different mode, optimized for different secure devices type ( with FORMAT, WRITE protection )
    - During NVRAM read/write SW also verify it condition and data


    MEMORY TOOL activated!
    Easy, fast and ultimate solution now come in MTK too!
    - Support eMMC and NAND flash IC`secure
    - Allow READ, WRITE, ERASE partitions
    - Show partitions states and info only for eMMC devices
    - Allow RE-init PMT ( from scatter )


    Other
    Lot of other changes from v1 line, which not mandatory to mention

    Known issues/warnings/info:
    1. [NAND on MT6570] v1712, v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
    In result you will give read/write FW errors and rest problems at all.
    Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
    2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
    1. [NAND on MT6570] UBI SPARSE image flashing may take MUCH time (up to 5 minutes and more) for some devices!
    3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
    Read-write data, which you want, ignore "EMPTY" states.
    4. [MEMORY TOOL] Old protocol secure devices (MT6750/MT6755) - LeEco and similar
    In some cases WIPE partition may not work!
    5. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND/eMMC devices! Result - stuck after system/userdata partition flashing
    6. FileSyhstems flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
    7. Device with NV_TYPE2 security may not work yet for repair sec!




    پاسخ با نقل قول  
     

  10. کاربران : 5 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  11. #37  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r3 - More secured devices and features!


    Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r3 - More secured devices and features !

    - Main
    DownloadAgent version 1816 supported and tested on all supported SoC.
    Fixed some memory leaks
    Connection level revised

    - MemoryTool
    Fixed multi-selection
    GPT init revised
    Preloader init revised

    - Service
    Repair Security revised. Fixed issues with some Meizu and other models.

    - Core
    Optimized different agents versions support ( DA16xx line )
    EMIDB updated
    Hint/Error explain module updated
    Activated SymLinks - allow reduce boot base size by redirecting diffirent brand/models if they have same base
    BootHelper ( stage 1 of 3 ) activated - hints/explanation of boot sequnce and correct file selection
    MT6758 support under test
    MT6771 support under test
    MT6765 support under test

    - Flasher
    Show Preloader HW compatibility when load firmware in flash tab
    Fixed file selection order - if SW package contain mixed types - secure will be selected by default

    - FW reader
    New types of firmwares supported
    Scatter creation optimized for some SoC

    - New models included
    Limited Alcatel support
    Limited Gionee support
    Limited Wiko support
    Limited Tecno support
    And diffirent other models
    Some other basic "generic" secure devices support optimized
    NAND devices on MT6570 moved to separate mode ( under base ) - FACTORY for ONLY FACTORY-provided FW flashing, INFINITY - for all rest operations

    Known issues/warnings/info :
    1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
    In result you will give read/write FW errors and rest problems at all.
    Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
    2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
    3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
    Read-Write data, which you want, ignore "EMPTY" states.
    4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
    5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
    6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
    7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
    8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
    If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
    Preloader info shown now during FW load.

    Credits :
    gracy_elec - different useful files contribution
    kamal_singla - testing and useful files contribution
    merujeffrey - useful files contribution and report logs


    Download link #1 - Download link #2 - Download link #3


    Upload file to Support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News
    پاسخ با نقل قول  
     

  12. کاربران : 2 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  13. #38  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features


    Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features



    - Main
    Connection level revised
    BROM level support optimized

    MT6771 CPU supported!
    MT6771 moved from TEST to GENERAL support.
    Firmwware read
    Firmware write
    NVRAM read
    NVRAM write
    Reset Settings / Format FS
    Reset FRP
    Reset Privacy
    MemoryTool

    - Service
    Repair Security revised. Fixed issues with some NV types.

    - Core
    EMIDB updated
    Hint/Error explain module updated
    MT6758 support under test
    MT6765 support under test

    - FW reader
    MT6771 supported
    New types of firmwares supported
    Scatter creation optimized

    - SP Unlock
    Revised unlock support for some models
    Info : MT6739/MT6763/MT6771 NOT supported YET!

    - New models included
    Limited Oppo support (F7/A3)
    Limited Vivo support
    And diffirent other models
    Some other basic "generic" secure devices support optimized

    Known issues/warnings/info :
    1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
    In result you will give read/write FW errors and rest problems at all.
    Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
    2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
    3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
    Read-Write data, which you want, ignore "EMPTY" states.
    4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
    5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
    6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
    7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
    8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
    If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
    Preloader info shown now during FW load.

    Download link
    پاسخ با نقل قول  
     

  14. کاربران : 2 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  15. #39  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features




    Supported CPU list:
    Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
    RDA Mirco: RDA8851 rev A,B,C,L,CL
    RDA Micro: RDA8826

    RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
    Flashing protocol updated
    Updated LOD tools ( flashing / customizing )

    Spreadtrum SC6533/G:
    Protocol updated
    Support for REV2 bootrom mode activated
    FW reading revised
    Updated LOD tools ( flashing / customizing )

    Spreadtrum SC6530/6531/A/C/E:
    Revised Repair security feature
    Flashing revised
    -> Activated "Format FFS" during BINARY dump writing
    -> Use that feature, if device not allow make direct format ( some C/E revision devices )
    User code read revised - activated 2nd mode : from DUMP
    -> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
    Activated AUTO fixer for memory dumps
    Internal loaders updated

    Spreadtrum other:
    Protocol updated
    PAC handling revised
    Improved Flashing procedure for SC7701/SC7702 devices
    Improved Flashing procedure for SC6825/SC8825 devices

    Known issues
    1. [I] AUTO fixer for memory dumps
    -> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
    -> Just select binary dump in flashing tab or any other operation, which require file select.
    2. [*] In some cases Format FFS may fail on E and C rev
    -> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.

    Download Link : http://dl1.infinity-box.com/download...M2SCR_v1.03.7z
    پاسخ با نقل قول  
     

  16. کاربران : 2 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  17. #40  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    Infinity `SM` software v2.00 released

    Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
    `SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
    Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.

    Infinity `SM` software v2.00 news:
    - many internal stability improvements
    - FRP unlock engine re-written
    - FRP unlock procedure updated
    - security area write for MTK based devices
    - security area write for Exynos based devices
    - Smart-Card firmware should be updated to use this software release
    - "SM ResourcePack" should be installed to get all released functions working

    At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.


    List of supported models and features for previous software release - Infinity `SM` software - general information, models, functions etc.
    Test reports are here - Success test reports with Infinity SM software


    Download link


    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News
    پاسخ با نقل قول  
     

  18. #41  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    Infinity `SM` software v2.01 released

    Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
    `SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
    Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.

    === Infinity `SM` software v2.01 ===
    - Service - add `Read Log` option for unlock Exynos phones via server
    - some bug fixed

    === Infinity `SM` software v2.00 ===
    - many internal stability improvements
    - FRP unlock engine re-written
    - FRP unlock procedure updated
    - security area write for MTK based devices
    - security area write for Exynos based devices
    - Smart-Card firmware should be updated to use this software release
    - "SM ResourcePack" should be installed to get all released functions working

    At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.


    List of supported models and features for previous software release - Infinity `SM` software - general information, models, functions etc.
    Test reports are here - Success test reports with Infinity SM software

    Download Link
    پاسخ با نقل قول  
     

  19. تشکرها از این نوشته :


  20. #42  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,284
    تشکر
    3,456
    تشکر شده 2,079 بار در 674 پست
    nfinity `SM` software v2.03 released

    Flashing - partitions list updated to support newest models/devices for flashing
    Intrface bugs fixed
    Included new procedure to support new FRP Reset method (in test, comming soon)

    For users with `SM` activation Exynos unlock codes are free !

    Discussion here

    پاسخ با نقل قول  
     

صفحه 3 از 3 اولیناولین 123

موضوعات مشابه

  1. جدیدترین نگارش های Octopus Box Samsung در این پست
    توسط se7en mobile در انجمن Octopus Box Samsung
    پاسخ ها: 6
    آخرين ارسال: 10 Aug 17, 15:26
  2. پاسخ ها: 17
    آخرين ارسال: 10 Jun 15, 15:19
  3. پاسخ ها: 1
    آخرين ارسال: 18 Oct 12, 19:08
  4. جدیدترین ویدیو های آموزشی MT-Box در این پست
    توسط Farzad.M در انجمن مباحث آموزشی
    پاسخ ها: 2
    آخرين ارسال: 15 Apr 09, 10:22
  5. جدیدترین نگارش باکس Bb5 آنلاکر دجان در این پست
    توسط مدیریت سایت در انجمن BB5 By D.K
    پاسخ ها: 19
    آخرين ارسال: 30 Oct 08, 16:38
برچسب برای این موضوع

نمایش برچسب ها

مجوزهای ارسال و ویرایش
  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •