موضوع: جدیدترین نگارش های دانگل cm2 اینفینیتی در این پست

صفحه 4 از 4 اولیناولین ... 234
نمایش نتایج: از شماره 46 تا 59 از مجموع 59
  1. #46  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,385
    تشکر
    3,661
    تشکر شده 2,441 بار در 755 پست
    Infinity Chinese Miracle-2 MTK/Mediatek v2.04 - New chips support and new features activated

    Base:
    Base - MT6761 support activated
    Base - MT6765 support activated
    Base - MT6771 support activated
    Base - Secure boot - ARB verification during boot ( via BROM logging )
    Base - Secure boot - SLA challenge state verify ( pass-trought file or nonce challenge )

    FWFlasher:
    FWFlasher - Some ancient secure devices flashing optimized ( early 6572 and similar )
    FWFlasher - MT6753/MT6752 flashing revized
    FWFlasher - Pre-flash backup option enabled
    FWFlasher - Flash core updated

    FWReader:
    FWReader - More accurate FW verification for signed types ( issues after FOTA "garbaging" )
    FWReader - ARB state and version, if present ARB bit
    FWReader - AVB state and version, if present AVB secure mechanism
    FWReader - FW logging info - if SW show it during load - make sure device contain SAME or LOWER version!
    FWReader - More types supported for safe read
    FWReader - Info reading improved

    Service:
    Service - Security repair revised ( NVRAM verify and some "old" types support )
    Service - "Repair BaseBand" option activated
    Service - Format FS revised
    Service - NVRAM module updated

    MemoryTool:
    MemTool - Improved work with partitions on LEGACY line
    MemTool - Wipe operation optimized ( def and adr mode )

    Platform:
    Platform - MT6761 support activated [ Under test ]
    Platform - MT6771 support activated
    Platform - MT6765 support activated
    Platform - MT6753 support optimized
    Platform - MT8172 support optimized
    Platform - MT8176 support optimized
    Platform - MT8163 support optimized
    Platform - MT8127 support optimized

    Loaders:
    LoaderDB - New agents included ( Moto, Huawei, ZTE, Asus and others )

    Other:
    Other - Lot of different small changes and fixes
    Other - BootHelper updated
    Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
    Other - EMI Module updated - MT6765/MT6771/MT8176/MT8172/MT8173/MT6753 supported
    Other - Automatic backup during Identify and critical operations ( list can be tuned via edit settings.ini )
    Other - Partial LEGACY NAND support ( complete boot/verify ) for testing purposes for now - MT6580, MT81xx series
    Other - All settings ( except FLASH tab and Platform Settings group ) now saved/load automatically


    Discussion and download links - https://www.infinity-box.com/support/?r=100061
    پاسخ با نقل قول  
     

  2. کاربران : 2 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  3. #47  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,385
    تشکر
    3,661
    تشکر شده 2,441 بار در 755 پست
    Infinity Chinese Miracle-2 MTK/Mediatek v2.05 - New models and features

    Base:
    Base - Secure boot - ARB verification revised for some secure configs and chips

    FWFlasher:
    FWFlasher - Flash core updated
    FWFlasher - SecureFlash on Legacy phones revised ( SECCFG options and other issues fixed )
    FWFlasher - MT6753/MT6752 flashing revised

    FWReader:
    FWReader - More accurate type detection on LEGACY lines
    FWReader - More types supported for safe read
    FWReader - Info reading improved

    Service:
    Service - "SimLock Reset" option activated - used to rollback all LockSettings to default
    Service - Format FS revised
    Service - Repair BB revised
    Service - NVRAM module updated

    Platform:
    Platform - MT6771 support optimized
    Platform - MT6753 support optimized
    Platform - MT8127 support optimized

    Loaders:
    LoaderDB - Lot of new agents included (Alcatel, Moto, Lava and others)

    Other:
    Other - Many different small changes and fixes
    Other - Some kind of GUI changes for better user expirience
    Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
    Other - EMI Module updated
    Other - Preloader tools, Preloader init and other related stuff updated
    Other - Scatter handling optimized for some vendor-specific stuff
    Other - Automatic backup revised (manual tuneup fix)
    Other - Partial LEGACY NAND support (complete boot/verify) - Identify option works now on some devices

    Info:
    Info: Alcatel support for NEW line devices restricted by PRELOADER level ONLY! Some partitions are PROTECTED! BROM mode not supported for now ( due remote SLA )
    Info: LEGACY secure flashing now pass at any base settings but IN SOME RARE CASES (like Huawei and similar) it may lead to BaseBand and other problems.
    Solution - REFLASH using CORRECT DA!
    Info: ARB nowdays appearing on more devices, make sure about you FLASH SAME version. (Identify ARB LOG and SW load LOG ) Not upgrade to newer ones, if need make some extend service etc. !




    Discussion and download link - https://www.infinity-box.com/support/?r=100062
    پاسخ با نقل قول  
     

  4. تشکرها از این نوشته :


  5. #48  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,385
    تشکر
    3,661
    تشکر شده 2,441 بار در 755 پست
    Infinity Chinese Miracle II SCR/SPD-RDA v1.04: New models and features

    Supported CPU list:
    Spreadtrum : SC6530, SC6531, SC6531(A/C/D)
    UniSoc : SC6531E, SC6533, SC6533G
    RDA Mirco : RDA8851 rev A,B,C,L,CL
    RDA Micro : RDA8826

    RDA Mirco RDA8851 rev A,B,C,L,CL
    RDA Micro RDA8826
    Spreadtrum SC6533/G :
    Flashing protocol updated
    BOOTROM mode support revised
    Updated LOD tools ( flashing / customizing )
    Repair security revised (
    -> FAC area rebuild
    -> 3rd item repair activated
    UserCode reading activated

    Spreadtrum SC6530/6531/A/C/D/E:
    Revised Repair security feature
    Flashing revised
    -> Secure/Signed lines flashing rebuild
    -> Masterimage build revised
    -> Whole flash erase fixed for NOR devices
    Internal loaders updated
    Database revised, loaders re-marked

    Spreadtrum other:
    Protocol updated, stuck issues during wrong boot selection fixed
    Improved Flashing procedure for SC7701/SC7702 devices
    Flashing customization module revised
    InternalDB/ExternalLoader detetection/selection revised




    Discussion and download links - https://www.infinity-box.com/support/?r=100064
    پاسخ با نقل قول  
     

  6. کاربران : 2 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  7. #49  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,385
    تشکر
    3,661
    تشکر شده 2,441 بار در 755 پست
    Infinity Chinese Miracle-2 SPD/UniSoc - CM2SP2 - v2.00 r1 released

    - Supported platforms:
    SpreadTrum:
    SC5735
    SC7715
    SC7731C, SC7731G
    SC9820
    SC9832A
    SC9850
    SC9853i

    UniSoC:
    SC9820E
    SC7731E
    SC9832E
    SC9850K
    SC9850KH
    SC9863

    - Support Generic (Non-Secure), SecureV1, SecureV2 devices
    Android 4/5/6/7/8 versions

    - Supported operations in initial release:
    Identify ( include complete device info )
    Reset Settings / Format FS
    Reset FRP
    Firmware flashing ( Safe Flash, Repartition, HW verify, Flash customizing )

    - Database:
    Basic wide-range bootloaders for common devices types
    Also lot of other pre-defined models already included in database

    - Extra:
    Feature: Completely safe flash engine ( allow flash SimLock / Signed / and other devices, recover critical data from semi-damaged NV )
    Feature: Automatic ModelDB update at new model detection ( loader select, pac load etc. )
    Feature: Customized boot option and sources: Manual PAC, Manual FDL pair with automatic details detection, Pre-defined DB, Self-Learning DB
    Feature: Complete Firmware Info detection at FW load with extended info




    Download link

    پاسخ با نقل قول  
     

  8. تشکرها از این نوشته :


  9. #50  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,385
    تشکر
    3,661
    تشکر شده 2,441 بار در 755 پست
    Infinity Chinese Miracle-2 SPD/UniSoc v2.01 - UniReader Edition - Android 4-5-6-7-8-9





    Infinity Chinese Miracle-2 SPD/UniSoc v2.01 - UniReader Edition - Android 4-5-6-7-8-9

    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

    - Core
    Protocol updated
    Alternate protocol support activated ( automatic switch depends on model )

    - New Self-Learning engine for semi-supported devices !
    In case of problem with device servicing - during identify session SW will make new database record
    That record available from boot menu after that to use exactly for this device line
    That will fix any incompatibility loader <-> device problems and remove any servicing issues

    - Service
    Identify - better structure detection, simlock state info
    Identify - Userdata state detection optimized
    Format FS - Forced Format revised

    - Flasher
    Optimized PAC handling
    Optimized older device line support ( Sc7715-Sc9832 from SPRD )
    NVManager updated - Identify, Security swap and verification, Recovery mode
    Activated flashing of own FlashFile format files made by FWReader

    - Firmware Reader activated!
    Allow read ANY security level phone from Spreadtrum or UniSoc on almost all Android OS versions!

    Support OLD SPRD line devices:
    SC7715, SC7731, SC9820, SC9832, SC9850 and their revisions and modifications
    Plain, Signed and RSA-enabled
    Android 4, Android 5, Android 6, Android 7 lines are supported (higher versions were NOT released from SPRD)

    Support NEW UniSoc line devices:
    SC7731E,SC9832E,SC9863,SC9850,SC9820E and their revisions and modifications
    Plain, Signed and RSA-enabled
    Android 6, Android 7, Android 8, Android 9 lines are supported (lower versions were NOT released from UniSoc)
    Arch32/Arch64 support

    Support "SPRD"-like chipsets with Intel X86 arch
    SC9853I and its modifications and revisions
    Plain, Signed and RSA-enabled
    Android 6, Android 7, Android 8 lines are supported

    It is the only existing and complete solution

    Additional info:
    Firmware use OWN format.
    Firmware is COMPLETE one, allow to fix any sw-related state including FlashChip erase, change or complete SW rebuild
    Unlike older SWReader version used in V1 line there is no need in bunch of additional re-connection operations or to make something special.

    - Database:
    New generic boots included, some boots updated

    - Other
    Bug fixes and some changes according users requests

    - Known issues:
    [1] UniSoc line is SLOW. It is VERY SLOW! Unlike SPRD ones, it consume x4-x5-x6 more time comparing to old SPRD.
    We made almost all possible for now to speed it up. And that is limit for protocol.
    In near time it should be some speed up to 20-30% but this solution still require some more time.
    [2] UniSoc devices with ARB active may dead on wrong SW version flashing at Android 9 line.
    We checking that issue and collecting samples. According users test and reports solution will follow.
    [3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
    [4] Sw will try always, in any case retrieve all device-side keys/security during flashing and identify, if they exists inside.
    Much backups better, that nothing. Actual for devices with paired/signed security and/or active keybox.
    [5] NAND devices on SC9820,SC7715,SC8830 not supported yet for FW reading


    Password for archive file (if any) is: 12345678

    Download link #1
    Download link #2
    Download link #3
    Download link #4
    Download link #5
    پاسخ با نقل قول  
     

  10. کاربران : 2 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  11. #51 Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features 
    مدیر انجمن
    شماره عضویت
    35924
    تاریخ عضویت
    Jan 1970
    ارسال ها
    2,304
    تشکر
    2,523
    تشکر شده 8,853 بار در 1,786 پست


    Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features



    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.


    Supported CPU list:

    Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
    UniSoc: SC6531E, SC6533, SC6533G
    RDA Mirco: RDA8851 rev A,B,C,L,CL
    RDA Micro: RDA8826

    RDA Mirco RDA8851 rev A,B,C,L,CL
    RDA Micro RDA8826
    Spreadtrum SC6533/G:

    Updated LOD tools ( Factory LOD support revised )
    UserCode reading improved

    Spreadtrum/UniSoc SC6530/6531/A/C/D/E:

    New feature activated: Complete identification
    During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
    During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
    During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )
    Readout naming changed to DeviceInfo details instead of flash size/flash vendor

    Repair security revised
    Database revised, loaders updated ( extended range of supported SC6531EFM devices with 4-8MB flash )

    Spreadtrum/UniSoc other:
    Protocol updated, error codes handling activated
    SC6531 with 16MB flash support revised
    FTM during flashing now make DNVM clean, FS clean and structure verification
    UserCode reading improved
    Some other bugfixes and small changes

    Info:
    "HardLock" detection feature for SP-locked device activated under test

    We are looking for SP-locked samples RDA Micro / UniSoc / SPDR FP platforms. Please contact to rd [at] infinity-box.com if you have units for test on hands.




    Password for archive file (if any) is: 12345678

    Download link #1
    Download link #2

    پاسخ با نقل قول  
     

  12. کاربران : 4 تشکر کرده اند از شما khandan mobile برای ارسال این پست سودمند:


  13. #52 Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and more 
    مدیر انجمن
    شماره عضویت
    35924
    تاریخ عضویت
    Jan 1970
    ارسال ها
    2,304
    تشکر
    2,523
    تشکر شده 8,853 بار در 1,786 پست
    Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features

    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

    - Core
    Protocol updated
    Error handling, error explanation and hint module activated
    SC9850 and similar devices WRITEFLASH security disable option enabled
    > Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error)

    - Android 9 line devices tested and supported for Firmware reading!
    - Self-Learning mode for Firmware Reader activated!
    That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware
    Just follow the SW instructions if need and you don't need to wait updates for latest devices

    - Service
    Security - NVM reading feature activated
    > Allow read complete device factory calibration data, security items
    > Save also modem info for cross-writing NV between different models
    Security - NVM writing feature activated
    > Allow restore / rewrite device factory calibration data, security items
    > Allow use different modes during restore:
    > 1. SWAP ( safe mode ) - if security alive SW will try swap security data
    > 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone
    Identify - better structure detection
    Identify - BaseBand deep identification
    > Allow read complete BaseBand info and read "MODEM TAG"
    > Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG
    > TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG
    UserData - PrivacyLock read feature activated
    > Allow read PRIVACY lock password and details
    > Support DIFFERENT models made by OEM "TRANSSION"

    - Flasher
    Optimized speed ( from 5% to 15% for UniSoc line )
    Optimized PAC handling
    Optimized older device line support ( SC7731GEA and similar from SPRD )
    NVManager updated - Identify, Backup, Security swap, Verification
    Activated new option - Re-Sparse.
    > Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices
    > Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing

    - Firmware Reader
    Android 9 line support finished, completely tested and confirmead as working
    Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now
    > FOTA, vendor-specific features and rest stuff has been tested

    - Database:
    New generic boots included for SC7731C/G
    New generic boots included for SC9863
    ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others

    - Other
    Bug fixes and some changes according users requests

    - Known issues :
    [1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD.
    [2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line.
    We are checking that issue and collecting samples. According to users test and reports solution will follow.
    [3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
    [4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD
    [5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading


    Password for archive file (if any) is: 12345678

    Download link #1
    Download link #2
    پاسخ با نقل قول  
     

  14. کاربران : 4 تشکر کرده اند از شما khandan mobile برای ارسال این پست سودمند:


  15. #53 Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features 
    مدیر انجمن
    شماره عضویت
    35924
    تاریخ عضویت
    Jan 1970
    ارسال ها
    2,304
    تشکر
    2,523
    تشکر شده 8,853 بار در 1,786 پست
    Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

    - Core
    Protocol updated
    Error handling, error explanation and hint module updated

    - Service
    NVM operations revized
    DiagMode option activated ( Platform -> Control -> DiagMode )
    > Change SW mode to diag, instead of flash. Do not require BootSelection.
    Allow for now:
    1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
    2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
    3. Read NV data, verify NV
    > Don't forget change SW mode between Service/Flash for those operations !

    New Identify option - device Platform, Device HW details identification
    > Allow detect device SOC family, RAM amount for faster loader selection
    > Work in DiagMode, Work ON MODERN and UNISOC chipset only !

    - Flasher
    Optimized flashing protocol
    Optimized older device line support
    NVManager updated - Identify, Backup, Security swap
    NVManager Recovery tool updated

    - Firmware Reader
    Optimized structure identification
    Activated "forced" reading. Option skip data verification.
    > In case of semi-damaged devices, if backup atleast of something required
    > In case of "Critical data damaged" errors
    Optimized data verification during create FW

    - Database:
    SC983xx generic loader DB updated
    SC9853i generic loader DB updated
    SC7731E generic loader DB updated
    SC7731x generic loader DB updated
    SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
    SC7731c/g loaders DB updated - various models and RAM size
    SC9832E loaders DB updated - Meizu, Wiko
    Some other various models with specific hw settings included in loader DB

    - Other
    Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
    Bug fixes and changes according users requests

    - Special thanks to respected Mr. gracy_elec


    Download link
    پاسخ با نقل قول  
     

  16. کاربران : 4 تشکر کرده اند از شما khandan mobile برای ارسال این پست سودمند:


  17. #54 Infinity Chinese Miracle-2 MTK/Mediatek v2.07 - New models and features 
    مدیر انجمن
    شماره عضویت
    35924
    تاریخ عضویت
    Jan 1970
    ارسال ها
    2,304
    تشکر
    2,523
    تشکر شده 8,853 بار در 1,786 پست
    Infinity Chinese Miracle-2 MTK/Mediatek v2.07 - New models and features

    As you know Infinty Team work hard and silently, but results of silent work may exceed any expectation.
    It takes more that hour to prepare list of changes so you can imagine how much time takes a work itself.
    Let's respect silent hard work instead of everyday's bla-bla (like many others do).

    Thank you to be with us during last 15 years !

    List of changes for v2.07:

    Core:

    NewSOC : MT6785 support under test
    NewSOC : MT6885 support under test
    Changed : Protocol updated for RAPHAEL line
    Changed : Protocol updated for LEGACY line
    BugFix : MT6752 support fixed
    BugFix : MT8172/MT8173/MT8176 BROM support fixed
    BugFix : MT6570 support fixed
    Changed : EMI engine revised
    Changed : AutomaticBoot selection revised. More types and combinations are supported.
    Changed : Loader v1924 supported and tested
    Changed : Loader v1936 supported and tested
    Changed : Loader v1944 supported and tested

    Flasher :
    New feature: unmerged signature support
    - Files with external signatures now flash correctly
    New feature: Forced mode for Raphael line
    - Allow automatically skip repartition, erase operations if it was not allowed without break flashing
    New feature: WHOLE Flash Pre-Erase
    - Erase whole USER region. Destroy ALL data include unique and secure one! Support both Modern and Legacy lines.
    Changed: Repartition procedure rebuild to support modern devices and special cases (user memory issues and other fixes)
    New feature: Smart erase
    - In manual mode selection and enabled pre-erase all unchecked partitions will not be touched
    - Storage boundary checks now works correct on legacy and modern lines

    Firmware Reader / Maker:
    Changed: Local DB updated to latest version
    Changed: Scatter creation support latest platforms and variants
    Changed: Scatter compatibility with SPFT optimized ( for DL only mode )
    New feature: FileSystem creation and params now generated according Android version
    New feature: Ability to skip "critical" partitions verification during read ( bl-unlocked devices and specific cases )

    MemoryTool:
    New feature: Switch working mode ( ADR - PRT options in global settings ) without tool restart (no need to exit and run software again)
    New feature: Error ignoring on RAPHAEL line devices. Errors are not triggers shutdown anymore.
    Changed: Update PMT operation rebuild. Support modern devices and use multiple factors now.
    Changed: Init preloader operation. Support plain preloader dumps that was created by MemoryTool.
    Changed: Partition listing style on LEGACY devices. In case of protected regions do not triggered shutdown anymore.
    Changed: Write operation now handle correctly some sparse images used in Android 9 and newer versions

    Service:
    BugFix: Format FS procedure updated
    BugFix: Reset FRP procedure updated
    BugFix: Identify procedure updated and revised
    New feature: eMMC life counter check during Identify
    - Show, if possible by Agent or HW, storage life status. LifeCycleEnd(ReadOnly), LifeCycleNearEnd states.
    - Support only Raphael newer than MT6739. Support NAND devices as well ( MT6570 )

    UserData:
    New feature: Reset Privacy Locks
    - Support old and modern devices. Procedure is USERDATA SAFE if that required

    LoaderDatabase:
    Base Loader v1924 included
    Base Loader v1936 included
    Base Loader v1944 included
    New TECNO sec agents included
    New VIVO sec agents included
    New ALCATEL sec agents included
    New Hisense sec agents included
    New Moto sec agents included
    New Huawei sec agents included
    New Lenovo agents included
    And other different and generic models can be found in list

    Other:
    Changed: Base DB revised, unused and "buggy" types removed from BASE agents.
    - Change settings if DA version not contain your device platform
    Changed: EMIDb updated, more types supported
    Changed: Preloader parser now shows more complete memory details

    Download link #1
    Download link #2
    Download link #3

    Password for archive is: 12345678
    پاسخ با نقل قول  
     

  18. کاربران : 2 تشکر کرده اند از شما khandan mobile برای ارسال این پست سودمند:


  19. #55 Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 & more 
    مدیر انجمن
    شماره عضویت
    35924
    تاریخ عضویت
    Jan 1970
    ارسال ها
    2,304
    تشکر
    2,523
    تشکر شده 8,853 بار در 1,786 پست
    Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 and more

    Silent work is much better than thousand words...

    - Support for PACv2 format activated
    - Core updated
    - Protocol updated
    - SC9820E support activated ( Generic and Secure types )

    - Repair security option activated
    Allow repair device security items on generic devices
    Work in Flash mode
    Work in DiagChan mode
    SimLock-enabled devices may NOT work
    Security-enabled devices will NOT work

    - Firmware Flasher updated
    Updated core
    Updated PAC types support
    Revised NVManager

    - Firmware Reader updated
    More accurate data verification
    Reading speed optimized for some UniSoc models
    Android version-depend mode activated ( allow avoid flashing issues on android 9 and newer )
    KaiOS devices supported ( SC7731E eMMC, SC9820E eMMC tested and working ) now for Read Firmware

    - Identify procedure revised
    Now it also support for security verification ( signed NV )
    Better FS state verification
    More usable build props info extraction

    - Revised manual mode selection and possible combinations ( can combine firmware and loader from any source )

    - Loader database
    SC7715 eMMC loaders included
    SC9820 loaders updated
    SC9863 loaders updated
    SC9820E eMMC loaders included
    Various range of models from Wiko, LYF, BLU, BQ, Symphny, Itel and others included in DB

    - Other
    Bug fixes and changes according users requests

    - Extra
    Xiaomi QIN 1S+ supported ( Identify, Repair, Firmware Reading, Reset Settings ) BKey : Call button
    Xiaomi QIN 2 supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button
    Xiaomi QIN 2 Pro supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button

    Download link
    پاسخ با نقل قول  
     

  20. کاربران : 4 تشکر کرده اند از شما khandan mobile برای ارسال این پست سودمند:


  21. #56 Infinity Chinese Miracle-2 MTK/Mediatek v2.08 - New models and repair features 
    مدیر انجمن
    شماره عضویت
    35924
    تاریخ عضویت
    Jan 1970
    ارسال ها
    2,304
    تشکر
    2,523
    تشکر شده 8,853 بار در 1,786 پست
    Infinity Chinese Miracle-2 MTK/Mediatek v2.08 - New models and repair features

    As ordinary, uniques functions and methods released.

    Please do not forget to download new drivers v5.1632_x86_x64 !

    Core:
    Changed : Loader v1952 supported and tested
    BugFix : Rebuild support for MT6572 line ( KaiOs and old devices )
    Changed : Automatic selection of higher available BASE loader at startup
    Changed : Automatic protocol switching for RAPHAEL line
    Changed : Initial META protocol support
    Changed : AutomaticBoot selection revised. More types and combinations are supported.
    Changed : Protocol updated for RAPHAEL line

    New feature : Meta protocol support activated
    !*Support Legacy line ( MT6572 .. MT6595 )
    !*Support Raphael line ( MT6750 .. MT6797 )
    !*Support Modern Raphael line ( MT6761, MT6765 and newer )

    Function : Identify ( AP/MD, SWversion info, Security details )
    Function : Reset Settings / Format FS ( NOT touch FRP )
    Function : Repair security for
    Legacy line ( from MT6572 and up to 6580 )
    Raphael line ( from MT6570 to MT6765 etc. )

    !*Devices with SLA will not work for repair without auth! ( even if Meta started )
    !*Devices with OTP will not work for repair! ( SW will just show write error )

    Service:
    Changed : Format FS procedure updated
    BugFix : Identify procedure updated and revised
    Changed : eMMC life counter check ( Raphael, more accurate status handling for latest loaders )

    UserData:
    Changed : Reset Privacy Locks procedure updated

    MemoryTool:
    BugFix : Long-run reading optimized for RAPHAEL line

    Firmware reader:
    Changed : Updated support for legacy platforms
    Changed : Updated support for MT6739 FP-like and KaiOS phones
    Changed : Local database update
    Changed : Data verification improved
    Changed : More types supported

    Flasher:
    BugFix : In some cases were made wrong SV5_BL image selection for EMI base
    Changed : Protocol updated for RAPHAEL line
    Changed : Protocol update for LEGACY line
    BugFix : Flash Erase ( whole mode ) revised
    BugFix : Flash Pre-Erase ( safe upgrade mode ) revised

    Other:
    Changed : Boot helper updated. Take attention to software logs and follow them. In most cases that enough to setup correct settings
    New feature : Reboot option activated in main tab. Switch charge / power off mode after operations
    New feature : META switch option activated in main tab. Used to switch SW between FLASH and META mode
    Changed : Loader database updated
    Changed : Minor changes in GUI, check buttons/fields hints to know more about alternative modes and special options of supported functions

    Info:
    META require working device condition. Charged battery (more than 20%). Installed drivers.
    New drivers v5.1632_x86_x64 is at support area.


    Password for files: 12345678


    Drivers


    Download link #1

    Download link #2

    Download link #3

    Download link #4
    پاسخ با نقل قول  
     

  22. کاربران : 3 تشکر کرده اند از شما khandan mobile برای ارسال این پست سودمند:


  23. #57 Infinity Chinese Miracle II SCR/SPD-RDA v1.06 - New models and features 
    مدیر انجمن
    شماره عضویت
    35924
    تاریخ عضویت
    Jan 1970
    ارسال ها
    2,304
    تشکر
    2,523
    تشکر شده 8,853 بار در 1,786 پست
    Infinity Chinese Miracle II SCR/SPD-RDA v1.06 - New models and features

    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

    Supported CPU list:
    Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
    SpreadTrum: SC68xx ( with external PAC )
    SpreadTrum: SC7702 ( with external PAC )
    UniSoc: SC6531E, SC6533, SC6533G, SC7702
    RDA Mirco: RDA8851 rev A,B,C,L,CL
    RDA Micro: RDA8826

    Core
    NewChip: Support UNISOC 8910 (FLASH) under test
    NewChip: Support IVY IoT (FLASH/SVC) under test
    Changed: UpToDate Protocol changes for latest FP platforms ( UniSoc )
    BugFix: Connection on SPRD tab
    BugFix: BOOTROM mode on latest SC6533G branches

    Support UNISOC 8910DM / UIS8910 chipset ( SVC mode )
    - Identify ( Security info, compilation info, modem info , APinfo )
    - Format FS / Reset Settings
    - Read UserCode / PrivacyCode
    - Repair Security
    !* Generic types only

    New Feature: SVC ( Diag ) mode support for SPRD / UniSoc
    - Identify ( Security info, compilation info, modem info )
    - Format FS / Reset Settings
    - Read UserCode / PrivacyCode
    - Repair Security
    !* Generic types only

    Service
    BugFix: Security repair not allow use some "non-standard" combinations ( RDA / SPRD / UniSoc )
    Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
    Changed: GUI revised for repair part ( CS info, Automatic complete at double click for security fields )

    UserData
    BugFix: Security code read in FlashMode revised ( SPRD )

    Other
    BugFix: Lot of small different changes and fixes






    Download link
    پاسخ با نقل قول  
     

  24. کاربران : 2 تشکر کرده اند از شما khandan mobile برای ارسال این پست سودمند:


  25. #58  
    مدیر انجمن
    شماره عضویت
    107634
    تاریخ عضویت
    Nov 2012
    ارسال ها
    1,385
    تشکر
    3,661
    تشکر شده 2,441 بار در 755 پست
    Infinity Chinese Miracle-2 MTK/Mediatek v2.10 - New MTK chips and UFS storage

    As ordinary, unique functions and methods released

    Core
    NewChip: Helio G90T (Formely MT6785) supported (UFS / eMMC)
    NewChip: MT6731 supported (eMMC / NAND)
    NewChip: Helio A20 (Formely MT6761 low-cost revision) supported
    NewChip: Helio P90 (Formely MT6779) support under test (UFS / eMMC)
    BugFix : MT6595/MT6597 BROM support broken, fixed (Agent 17xx-19xx)

    New Feature : UFS FlashIC support
    !* Support flashing Factory / Infinity FW
    !* Support MemoryTool
    !* Support Factory Firmware reading
    !* Support Service operations
    !* SOC's on market, support UFS chips right now : G90, P70, P90

    Service
    Changed : Repair security procedure updated (Flash and Meta mode)
    Changed : SPUnlock procedure updated (Flash and Meta mode)
    Changed : Identify procedure updated
    Changed : Format FS / Reset FRP now support UFS flash too
    New Feature : Modem Re-Init (NVfix)
    !* Useful after FixBB, in case of modem subsystem alive

    Firmware Reader
    New Feature : UFS flash support
    New Feature : Combo scatter creation for newest chipset
    !* Produced scatter MAY NOT work with OLDER SPFT (factory flasher) below 19xx versions!
    !* Produced scatter is 100% like factory ones
    Changed : Improved structure identification
    Changed : Support more different types
    Changed : NAND support revised
    Changed : LEGACY line support revised
    Changed : Platform and version depend scatter creation for better compatibility with SPFT
    Changed : LEGACY line with Android 9 (MT6580 and similar) specific changes

    MemoryTool
    New Feature : UFS flash support
    !* Support Read , Write , Erase partitions
    !* Support RePartition
    !* Support Preloader init
    !* Support Change Work mode (ADR / PRT)
    !* Change storage settings useless, all flash content mapped in single mode
    Changed : Structure identification
    Changed : Automatic files selection at folder change

    Flasher
    New Feature : Support COMBO scatter's (v2.xxx)
    !* Automatic selection depend on device Flash (UFS/EMMC/NAND)
    !* Storage selection done automatic according detected, for end-user all selection and rest settings remain same as before
    New Feature : Support MTK chips with UFS FlashIC flashing
    !* All features (Erase / Verify / PMT upgrade / Backup / HW Compatibility) work for devices with UFS as well
    Changed : Scatter tab changes, specific to multi-storage selection and settings

    Meta protocol functions updated
    Changed : Updated security detection feature
    BugFix : Updated structure verification

    Other
    BugFix : A lot of minor changes and bugfixes applied
    Changed: Many internal changes to improve compatibility with other applications, antiviruses and similar software.
    Changed: Software load/operation speed improvements implemented


    Password for files: 12345678


    Download link #1

    Download link #2

    Download link #3



    Information about Infinity products support period renew due to situation with COVID-19
    پاسخ با نقل قول  
     

  26. کاربران : 3 تشکر کرده اند از شما parlaq67 برای ارسال این پست سودمند:


  27. #59 Infinity Chinese Miracle-2 MTK/Mediatek v2.13 - Android 10 and new SoC types 
    مدیر انجمن
    شماره عضویت
    35924
    تاریخ عضویت
    Jan 1970
    ارسال ها
    2,304
    تشکر
    2,523
    تشکر شده 8,853 بار در 1,786 پست
    Infinity Chinese Miracle-2 MTK/Mediatek v2.13 - Android 10 and new SoC types



    As ordinary, unique functions and methods released



    Core

    Changed : Protocol updated ( Raphael/Legacy )
    NewChip : MediaTek MT8765 supported
    NewChip : MediaTek MT8766 supported
    NewChip : MediaTek Helio G70 supported
    NewChip : MediaTek Helio G80 supported

    Service
    Changed : Identify
    !* More accurate FS state detection
    !* Support for different "customized" devices identify - Huawei and similar
    !* Support for A/B structure devices for read complete info - Nokia, Doogee, Infinix and similar
    !* Support GSI/Trebble devices for read complete info
    !* Android 5/6 devices fixes

    Changed : Smart Reset
    !* Optimized support for Android 5, 6, 10
    !* Optimized support for "customized" cases - Oppo, Vivo, Huawei and similar
    !* Optimized work with GSI/Trebble/A/B devices

    Firmware Reader
    New Feature : Android 10 supported!
    !* Read FW result is completely factory-like
    BugFix : Work with big partitions ( more than 4 GB )
    Changed : Logical FileSystems sparsing supported
    Cahnged : More intellegent identify of unknown layouts
    Changed : Improved structure identification
    Changed : Support more different types
    Changed : Android version-depend additional data creation

    Model DB
    Changed : New agents included for Xiaomi devices ( G70/G80/Dimensity )

    Other
    BugFix : Minor changes and fixes
    GUI : Store last used FormatMode enabled

    Thanks to : kamal_singla, gracy_elec and all other friends !


    DOWNLOAD:
    کد:
    http://dl1.infinity-box.com/00/pub.php?dir=software/
    پاسخ با نقل قول  
     

  28. کاربران : 2 تشکر کرده اند از شما khandan mobile برای ارسال این پست سودمند:


صفحه 4 از 4 اولیناولین ... 234

موضوعات مشابه

  1. جدیدترین نگارش های Octopus Box Samsung در این پست
    توسط se7en mobile در انجمن Octopus Box Samsung
    پاسخ ها: 14
    آخرين ارسال: 17 Mar 20, 18:53
  2. پاسخ ها: 17
    آخرين ارسال: 10 Jun 15, 15:19
  3. پاسخ ها: 1
    آخرين ارسال: 18 Oct 12, 18:08
  4. جدیدترین ویدیو های آموزشی MT-Box در این پست
    توسط Farzad.M در انجمن مباحث آموزشی
    پاسخ ها: 2
    آخرين ارسال: 15 Apr 09, 10:22
  5. جدیدترین نگارش باکس Bb5 آنلاکر دجان در این پست
    توسط مدیریت سایت در انجمن BB5 By D.K
    پاسخ ها: 19
    آخرين ارسال: 30 Oct 08, 15:38
برچسب برای این موضوع

نمایش برچسب ها

مجوزهای ارسال و ویرایش
  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •